M2035 Blank Copies through DP and on Glass

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • D Colour
    replied
    Re: M2035 Blank Copies through DP and on Glass

    Originally posted by jessrhyl
    my email is jessrhyl@yahoo.com

    thank you for responding.

    do you have the originals for m2535?
    302NM94340 & 302NM94330
    Just sent you an email. Yes I still have the originals.

    Leave a comment:


  • jessrhyl
    replied
    Re: M2035 Blank Copies through DP and on Glass

    Originally posted by D Colour
    Hi, still won't upload. Its only 6.5mb. Can you send me your email?


    my email is jessrhyl@yahoo.com

    thank you for responding.

    do you have the originals for m2535?
    302NM94340 & 302NM94330

    Leave a comment:


  • jessrhyl
    replied
    Re: M2035 Blank Copies through DP and on Glass

    Originally posted by D Colour
    Hi
    We are having this exact issue on the M2535DN, can you tell me what your solution was?
    Engineer has tried U021 and U002, but the issue persists.
    Thanks
    James


    also experienced this in m2535dn
    @year 2019

    Leave a comment:


  • D Colour
    replied
    Re: M2035 Blank Copies through DP and on Glass

    Originally posted by jessrhyl
    can you still upload the table chart?
    Hi, still won't upload. Its only 6.5mb. Can you send me your email?

    Leave a comment:


  • jessrhyl
    replied
    Re: M2035 Blank Copies through DP and on Glass

    Originally posted by D Colour
    [ATTACH]37897[/ATTACH]

    DP Chart - [ATTACH]37898[/ATTACH]

    Table Chart - File is too large, i'll upload a smaller file it tomorrow.


    can you still upload the table chart?

    Leave a comment:


  • D Colour
    replied
    SB-COM-0314-E069.pdf

    DP Chart - DP.pdf

    Table Chart - File is too large, i'll upload a smaller file it tomorrow.

    Leave a comment:


  • D Colour
    replied
    Re: M2035 Blank Copies through DP and on Glass

    Originally posted by oldtech1
    check scanner lock?
    Yeah definitely off. The scanner moves freely.

    it must be a similar cause as Buzz, because the the drive assy was getting changed before the issue. Checked and reseated all the connections.

    Leave a comment:


  • oldtech1
    replied
    Re: M2035 Blank Copies through DP and on Glass

    check scanner lock?

    Leave a comment:


  • D Colour
    replied
    Re: M2035 Blank Copies through DP and on Glass

    Hi
    We are having this exact issue on the M2535DN, can you tell me what your solution was?
    Engineer has tried U021 and U002, but the issue persists.
    Thanks
    James

    Leave a comment:


  • Copier & Repair LLC
    replied
    Re: M2035 Blank Copies through DP and on Glass

    hi there
    try to change the scanner circuit board.
    Copier Repair In Wisconsin Madison | Stoughton

    Leave a comment:


  • buzz
    replied
    Re: M2035 Blank Copies through DP and on Glass

    Originally posted by Santander
    If internal reports are printing fine you have gotten the scanner values way out of wack. Have you done a sim 21 to restore the unit to the default values. That is where I would start as you seen to have gotten the scan values so out of wack the unit cannot see the beginning of the scan page.
    Thanks for the tip. I'll definetely restore the values. I also found auto adjustments on U411 but waiting for the test charts to come in first. Thanks again!

    Leave a comment:


  • Santander
    replied
    Re: M2035 Blank Copies through DP and on Glass

    If internal reports are printing fine you have gotten the scanner values way out of wack. Have you done a sim 21 to restore the unit to the default values. That is where I would start as you seen to have gotten the scan values so out of wack the unit cannot see the beginning of the scan page.

    Leave a comment:


  • buzz
    started a topic M2035 Blank Copies through DP and on Glass

    M2035 Blank Copies through DP and on Glass

    Blank pages are printing when copying on the glass and from Document Processor. Internal printing is fine (status pages, maintenance reports...).

    We brought this machine in for varying lead edge issues and were adjusting lead edge timing and all of a sudden the copies are blank .

    The exposure lamp turns on.
    Current Combined Firmware is uploaded.
    USB thumb drive file printing is fine.
    Scanning to USB thumb drive shows all black document.
Working...