I have 2 of these mcs that have had this problem when the toners are installed sometimes the lid wont shut properly at the left hand side.
I am using the correct genuine toner and if I mess about and take toners out 3 or 4 times it shuts.
They are all seated right and if i gently bang the rear panel at left hand side near the lid it closes.
Thers no problem with the couplings they release and lock ok.
I can try a good toner from another mc and it still doesnt take.
Its usually the magenta thats at fault but can be any.
Ive tried a new lid thinking it was sprained
I am using the correct genuine toner and if I mess about and take toners out 3 or 4 times it shuts.
They are all seated right and if i gently bang the rear panel at left hand side near the lid it closes.
Thers no problem with the couplings they release and lock ok.
I can try a good toner from another mc and it still doesnt take.
Its usually the magenta thats at fault but can be any.
Ive tried a new lid thinking it was sprained
Comment