Lance15
Service Manager
Last Activity: 1 day ago
Joined: 06-30-2015
Location: Lutherville, MD
-
If you look at the carriage rod, do you see grease, or, is it clear? -
Maybe too much friction? Maybe the carriage rod needs lubrication.Leave a comment:
-
The formatters on these printers suffered from cracked solder joints under the main BGA chip.
I baked (reflowed) several of these formatters...Leave a comment:
-
I've got an M130fw sitting next to me that I use. The only PARTS I would replace are the pickup roller and separation pad for the printer or ADF. Anything...Leave a comment:
-
There is no documented procedure to get to the solenoid as is typical for these lower-end units. You'll have to figure it out. I don't mean to be so...Leave a comment:
-
Lifter drive assembly - RM1-4585-000CNLeave a comment:
-
Give a Full Calibration a go:
Menu
Scroll down to Configure Device and select it
Scroll down to Print Quality and select it...Leave a comment:
No activity results to display
Leave a comment: