Kyocera 2100 Reg gears skipping.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jammed
    Technician
    • Jun 2015
    • 33
    #1

    Kyocera 2100 Reg gears skipping.

    This machine has a clicking sound and registration issues..
    I trouble shot it to the helical gears on the ends of the reg roller shafts, they ride up and skip a tooth.
    New gears didn't help.
    I think it needs more spring pressure under the lower roller.
    Maybe a bulletin on this?
    TIA
    -Steve
    Tags: gears, reg, roller, skip, tooth
    • Rpizzle
      Technician
      • Mar 2014
      • 47
      #2
      Re: Kyocera 2100 Reg gears skipping.

      not sure if this is your issue but i have had a few machines where this goes out in them. parts drive feed assy sp (302lv94253)

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 23010
          #3
          Re: Kyocera 2100 Reg gears skipping.

          The plastic bushings on the registration drive oval out, until the gears begin to skip. And the developer drive clutch and registration clutch rust out and slip. The difficulty here is that you can order the clutches, but you can't order the bushings. They are not a separate part, or part of any assembly.

          Since the machine was already down anyway, I took two bushings and matched them from my gallon size bucket-O-bushings. I had a dozen matches based on size, then selected the oil impregnated bronze bushings for longevity. It takes (4) bushings. About a month later I replaced the pickup drive assembly for an entirely separate jamming issue. 1.2M prints. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            Previous template Next
            Working...