Kyocera page counts - Email from KFS

[kuby]

Someone told me that there is a way to setup the Kyocera in KFS to automatically send you a email of the page counts. Is this right? Can not find any setting in KFS for this.

Thanks
***********************

Found the setting for the Meter Export. But having problems setting it up. When I test the connections I keep getting an error about Dealer ID. Under SENDER INFORMATION it asks for DEALER ID* and METER SOURCE*, where do I get these. Tried OUR ID and the Access Code for the customer and still get the error. And what about the Meter Source setting, where do I get this?

[tmaged]

Re: Kyocera page counts - Email from KFS

That's where you go to set up the meter export into e-Automate.

[daveh12]

Re: Kyocera page counts - Email from KFS

open the web browser on a computer linked to the photocopier. type in the search bar the ip address of the copier followed by /svcmntrpt. i.e. 192.168.1.100/svcmntrpt.
Type in the settings here. Obviously the copier has to be set up on the network correctly including DNS server settings.