Need advice on the best 3 to 5 year old Kyocera Color Copier MFPs

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • anthony123
    Technician

    Site Contributor
    50+ Posts
    • Nov 2007
    • 62

    #1

    Need advice on the best 3 to 5 year old Kyocera Color Copier MFPs

    I need some suggestions on the most reliable least troublesome 3-5 year old Color Kyocera MFP. I have been servicing B&W Mita/ Kyocera/ Copystar Machines for many years and have serviced a few FS-5016n printers years ago and some Ricoh Color Copier MFPs. I need to sell 2 used color machines to an existing customer and would like to know from technicians which models they liked. The volume will be around 5k per month mostly color. Size and speed are not critical say 15ppm and up in color would be fine. They do need to run Ledger Paper so it would have to be a bigger machine. I've seen quite a few larger machines from wholesalers that they are selling very cheap, which worries me. My main concern is reliability and ease of service
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22973

    #2
    Re: Need advice on the best 3 to 5 year old Kyocera Color Copier MFPs

    The AlphardI's are quite reliable, just stock up on charge rollers (like any other Kyocera with a charge roller).
    KM-3050ci to KM5550ci

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • Scott
      Trusted Tech

      Site Contributor
      100+ Posts
      • Dec 2009
      • 190

      #3
      Re: Need advice on the best 3 to 5 year old Kyocera Color Copier MFPs

      I agree with blackcat, 3051's also

      Comment

      Working...