If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Sorry, I can't read the text in the thumbnail. Is one of the cartridges empty? I've also seen toner cartridges harden up or compact, like a brick. Take the offending toner cartridge out behind the building and beat it against the pavement to break up the clumps. It's worked for me.
Also on a Saturn, I got a message "Non-Kyocera Toner Installed", "Add Toner Black" or any other color, after changing the engine PWB. Connector at rear frame from the RFID PWB to YC26 on the engine PWB is partially connected, due to difficulty in removing connectors from the engine PWB. Reseat the connector at the rear frame, from YC26 on the engine PWB to the RFID PWB.
This last was difficult to diagnose, since the text "RFID" appears only once in very small type, buried in the circuit diagram. =^..^=
Last edited by blackcat4866; 10-11-2018, 10:56 PM.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
Comment