CS 306ci No cyan listed on status page

[Old-Tech]

Re: CS 306ci No cyan listed on status page

It could be that the read sensor in the hopper assembly is messed up, have you checked it? And since it's such an odd issue have you spoke with your local Kyo rep? They see all the weird stuff all the time and may be able to offer some insight.

Thanks RobertOB,
Yes I have tried the REID board and I am working with the hot line now. They are telling me it could be that I am using TK-5197 and not TK-5199 because it is a Copystar. I find that weird because all the other colors are running TK-5197 with no problems.

[Geo]

Re: CS 306ci No cyan listed on status page

Thanks RobertOB,
Yes I have tried the REID board and I am working with the hot line now. They are telling me it could be that I am using TK-5197 and not TK-5199 because it is a Copystar. I find that weird because all the other colors are running TK-5197 with no problems.

The information from hot line is incorrect...The toners are interchangeable , personal experience.

Cheers...

[Old-Tech]

Re: CS 306ci No cyan listed on status page

Thanks RobertOB,
Yes I have tried the REID board and I am working with the hot line now. They are telling me it could be that I am using TK-5197 and not TK-5199 because it is a Copystar. I find that weird because all the other colors are running TK-5197 with no problems.

this worked on the old color machines.turn off machine ,remove all toners then turn on machine, when its ready to print turn off again then put all toners back in and see if they all register.

Thanks for the tip. This didn't work either

[Old-Tech]

Re: CS 306ci No cyan listed on status page

Thanks RobertOB,
Yes I have tried the REID board and I am working with the hot line now. They are telling me it could be that I am using TK-5197 and not TK-5199 because it is a Copystar. I find that weird because all the other colors are running TK-5197 with no problems.

Hi all.
I'm having an issue with CS 306ci cyan toner not showing up on the status report or in the Command Center. Updated the firmware and tried a new cartridge. Tried a new developer unit and REID board and same thing. Any help would be greatly appreciated. Thanks in advance.

Well I found it..yay The machine was running TK-5197 toner. I turned the machine off, installed a TK-5199, turned it back on and there it is in the report. Turned it off, installed the TK-5197C and there it is back in the report. Im thinking it had to see the TK-5199C to register it, then it doesn't care which one you use...go figure.