CS-C3232 with 6030 error

[jmandassociates]

Need help with a CS-C3232 with a 6030 error. I replaced the fuser with a brand new fuser and it still comes up with the same error.

[allalone]

you need to reset the fuser error sim I think its 600 something can't remember right off the top of my head but 630 comes to mind should be around there somewhere i think.

[jmandassociates]

It was 163. That worked. Now the error went away and it makes a copy, but it gets jammed right at the exit area as it is leavign the fuser. It crumbles up like an acordian.

[just a tech]

May want to take a look at the actuator for the exit gate ass'y. Have seen these get brittle and crack causing the gate not to function properly. Kyocera calls it an "arm link". Part Number = 2C921180. Good luck..

[allalone]

Sorry about the 630 sim I havent worked on a kyocera in a few months been dealing with everthing but kyocera it all gets a little foggy dealing with all manufacturers.