Long story short, is their documentation to support that the Alfard II (TA-'01) series smbv2 compliant? Machines have 7.01 or higher firmware. IT dept tells me they are not smbv2 compliant. I looked for a white sheet but could not come up with anything.
-
-
Re: Alfard II ( '01 series) Smbv2 compliency documentation?
Here is a list of smbv2 compliant kyoceras anything above 01 series with firmware upgrade- TASKalfa 8001i
- TASKalfa 7551ci
- TASKalfa 6501i
- TASKalfa 6551ci
- TASKalfa 5501i
- TASKalfa 5551ci
- TASKalfa 4501i
- TASKalfa 4551ci
- TASKalfa 3501i
- TASKalfa 3551ci
- TASKalfa 3510i
- TASKalfa 3051ci
- TASKalfa 3010i
- TASKalfa 2551ci
- ECOSYS M3540idn
- ECOSYS M6030cdn/P-C3060 MFP
- ECOSYS M3040idn
- ECOSYS M6530cdn/P-C3065 MFP
- ECOSYS M3550idn
- ECOSYS M6035cidn
- ECOSYS M3560idn
- ECOSYS M6535cidn
- ECOSYS M2030dn
- ECOSYS M6026cdn
- ECOSYS M2530dn
- ECOSYS M6526cdn
- ECOSYS M2035dn
- ECOSYS M6026cidn
- ECOSYS M2535dn
- ECOSYS M6526cidn
- TASKalfa 3011i
- TASKalfa 306ci
- TASKalfa 3511i
- TASKalfa 356ci
- TASKalfa 6002i
- TASKalfa 406ci
- TASKalfa 5002i
- TASKalfa 2552ci
- TASKalfa4002i
- TASKalfa 3252ci
- TASKalfa 8002i
- TASKalfa 3552ci
- TASKalfa 7002i
- TASKalfa 4052ci
- TASKalfa 5052ci
- TASKalfa 6052ci
- TASKalfa 8052ci
- TASKalfa 7052ci
- TASKalfa 8001i
-
Re: Alfard II ( '01 series) Smbv2 compliency documentation?
SMBv2 / SMBv3 support for Alphard II was added in firmware version 6.00. You can find this documented in the current Firmware Readme file (20180712215951911_3501i-4501i-5501iENRMR18.pdf).Comment
-
Re: Alfard II ( '01 series) Smbv2 compliency documentation?
There is also firmware available through your ASM for the Alphard I (00 Series). Don't call the hotline, they don't know about it, evidently.Comment
Comment