[Dead] kyocera taskalfa 300ci WELCOME message.... help

[wcanonw]

hello a favor do you have the firmware?
I need the firmware to see if the fault is due to the firmware

[Phil B.]

Re: kyocera taskalfa 300ci WELCOME message.... help

hello a favor do you have the firmware?
I need the firmware to see if the fault is due to the firmware

why the fuck did you start another thread on this?

[wcanonw]

Re: kyocera taskalfa 300ci WELCOME message.... help

why the fuck did you start another thread on this?

because nobody contributes with the firmware

[Phil B.]

Re: kyocera taskalfa 300ci WELCOME message.... help

because nobody contributes with the firmware

1) you have an open thread on this

2) you are NOT a contributor

3) most "suggestions" you have made in other threads were USELESS

4) Firmware and Manuals are COPYRIGHTED materials

5) if you are a tech (highly doubtful) you're not much of one.

6) all those comments/posts you have red flags and no rep power.. = LOSER

[Tom]

Re: kyocera taskalfa 300ci WELCOME message.... help

1) you have an open thread on this

2) you are NOT a contributor

3) most "suggestions" you have made in other threads were USELESS

4) Firmware and Manuals are COPYRIGHTED materials

5) if you are a tech (highly doubtful) you're not much of one.

6) all those comments/posts you have red flags and no rep power.. = LOSER

Lol, Phil don't hold his punches.

[Scott]

Re: kyocera taskalfa 300ci WELCOME message.... help

Dang Phil lighten up!