KM3050

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pete!
    Technician
    • Jan 2009
    • 10
    #1

    KM3050

    Hi
    '
    This Kyocera KM3050 keep requesting to clean glass when the glass is clean!!!... Does a 906 reset will stop this?? or what is i have to do...

    thanks
    -37C Timmins,ON
    Tags: km3050
    • kyoceradude
      The Great Gazoo

      250+ Posts
      • Aug 2006
      • 442
      #2
      Originally posted by pete!
      Hi
      '
      This Kyocera KM3050 keep requesting to clean glass when the glass is clean!!!... Does a 906 reset will stop this?? or what is i have to do...

      thanks
      -37C Timmins,ON
      Turn sim 326 to off. Do you have lines on the copies? Also try changing shadding position sim 63....
      My mission here on Earth is to help all you Dum-Dums!

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 23008
          #3
          My customers make this mistake all the time. Are you cleaning the slit glass? That is what this message is requesting. Look at the little illustration on the panel. Also clean the white level reference on the DF (over the slit glass). =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • vikingmita
              Trusted Tech

              100+ Posts
              • Nov 2008
              • 163
              #4
              and you don't only have one slit glass, you have two. dual scan.

                Comment

                Previous template Next
                Working...