If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I think it might just be telling you where it's going to be scanning if you press the start button. . When you put a sheet up in the document feeder it Changes location of that icon and starts pointing at the top of the doc feeder.
I think it might just be telling you where it's going to be scanning if you press the start button. . When you put a sheet up in the document feeder it Changes location of that icon and starts pointing at the top of the doc feeder.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
Comment