km-2540\3040 t\s unit

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cmpelser
    Trusted Tech
    • Jan 2008
    • 173
    #1

    km-2540\3040 t\s unit

    In the last week I've had 2 machines now..
    the transfer roller just 'falls' out when the customer opens the left door.
    on the one machine, I put it back together. Perfect.
    On the other machine I ended up breaking one of the clips (part of the bushing on the transfer roller)
    these clips forming part of the bushing looks like a serious weak point!!!!
    anyone experienced this before???
    Tags: bushings, lef, unit
    • kyoceradude
      The Great Gazoo

      250+ Posts
      • Aug 2006
      • 442
      #2
      check this bulletin
      Attached Files
      My mission here on Earth is to help all you Dum-Dums!

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22999
          #3
          Extremely common. Keep the rear bushings on hand. I believe that the rear bushing has been updated. The same bushings are used in several different machines. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • aodtech
              Trusted Tech

              100+ Posts
              • Nov 2007
              • 194
              #4
              Had this happen to a couple 3040s. I just replaced the Transfer Units under warranty and problem solved. The new units are kind of a tough squeeze to fit, but I consider that a good thing.

                Comment

                Previous template Next
                Working...