KYOCERA P3260

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • newdente.gianluca
    Technician

    50+ Posts
    • Feb 2016
    • 58
    #1

    KYOCERA P3260

    Good morning I ask if anyone has ever had this machine (kyocera p3260) that produce blank prin and if anyone knows where the contact (I attach a photo) arrives, it seems like it doesn't arrive anywhere
    the things I've done: replacement of the high voltage board, check the developer drum unit on another machine (eg they are working), check the laser beam if it is visible: it is visible but if it had been the laser the machine would have given an error, this machine is driving me crazy.
    Attached Files
    Tags: None
    • Ropariva
      Senior Tech

      500+ Posts
      • Mar 2016
      • 656
      #2
      Have you confirmed the developer and drum are actually rotating in this machine? Easy to do, just mark the position o the drum and the dev rollers with a marker and run a print.

        Comment

        • nathicana
          Trusted Tech

          Site Contributor
          250+ Posts
          • Aug 2008
          • 329
          #3
          This design was notorious for the developing roller not turning due to the developer clutch 302KV94520

            Comment

            Previous template Next
            Working...