User Profile
Collapse
-
I’d suspect the paper has a deviation in it’s surface after the first run. Ie, a dip at that point that is causing poor transfer on the second side....Leave a comment:
-
So…..based on your scant information and no photo, are you saying it occurs on the back of a single sided document? By “top” do you mean leading...👍 1Leave a comment:
-
I’ve had a couple of 54 series fail with this error. Can’t recall having to replace one on a 4053, so I’d say it’s pretty rare....Leave a comment:
-
It’s a very easy assembly to change. The only tip I can give is you will need to press in the black pressure lever to remove the old one and same fitting...👍 4Leave a comment:
-
This may work for you as previously mentioned, but the hi speed machines used a 8gb ssd and the low speed were 32gb as the hi speed devices also had a...👍 1Leave a comment:
-
Sounds like you also hark back to analog days with big heavy flywheels designed into the drive systems to reduce jitter. It seems to me the issue was...Leave a comment:
-
These DF-7100’s are rubbish. Hopefully better in the new generation but we have had issues with just about every one in the field at some point. 8800...👍 2Leave a comment:
-
Thanks, by why the heck would you do it this way. Seems direct from the L-Keys web site is so much simpler....Leave a comment:
-
What? I’ve never heard of using this feature to upgrade a speed licence. That is done via L-Keys and the licence keyed in via the control panel. Are...Leave a comment:
-
I’m sorry but that is a feature of this model. I’ve seen it worse than this and I’ve seen it better than this, but it’s always there to some extent...👍 1Leave a comment:
-
The new generation machines use the serial number as the password. So it is Admin and serial number instead of Admin and Admin.
Reset is easy....Leave a comment:
-
As per above. Do all at one time. Don’t do U119, that’s no longer needed. Do 464, 469, 464, 410. Check U110 and U930 are reset. All good for another...👍 2Leave a comment:
No activity results to display
Show More
Leave a comment: