In need of 406ci Firmware v5.0

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Stephen P. Thurman
    Junior Member
    • Jul 2025
    • 1

    #1

    In need of 406ci Firmware v5.0

    Working on a college copier. They have PaperCut installed and use magnetic swipe card readers for access. Unfortunately, updating firmware on any of their machines past a certain point causes the readers to become nonfunctional. Kyocera won't provide older firmware and these models have dropped off their support list as of this year. So far, PC hasn't been any help with this either. Our only working solution has been to keep the FW at an older level while they phase machines out over time. So, I really need the FW v5 from 2019 that has been working just fine until someone decided to update it... or a solution to what setting on the machine, in PC, or the reader configuration would fix this issue.

    Thanks all.
  • ThisPete
    Snr/troubleshoot/network

    Site Contributor
    100+ Posts
    • Jun 2014
    • 246

    #2
    Is there a reason that you want to update the firmware?

    Comment

    Working...