Adjust Horizontal Scan Position on Glass or Doc Feeder for Kyocera 4551?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • CopyTech1975
    Technician
    • Oct 2021
    • 17

    #1

    [Misc] Adjust Horizontal Scan Position on Glass or Doc Feeder for Kyocera 4551?

    Having issues scanning off the glass and doc feeder, the image is about 1/8 in off the top of the page. Printing is actually fine. Is there an adjustment in service mode that will center the image or change the horizontal scan position? Found some adjustment codes but not sure which one is the right code.
    Thanks for any replies.
    Kyocera Optical Adjustments.jpg
  • yakyitz
    Trusted Tech

    100+ Posts
    • Nov 2007
    • 245

    #2
    Re: Adjust Horizontal Scan Position on Glass or Doc Feeder for Kyocera 4551?

    Go to the Appendix of the manual and follow (9) Chart of image adjustment procedures

    Comment

    • CopyTech1975
      Technician
      • Oct 2021
      • 17

      #3
      Re: Adjust Horizontal Scan Position on Glass or Doc Feeder for Kyocera 4551?

      Thanks YakYitz.

      Comment

      • KYO_OEM
        Senior Tech

        500+ Posts
        • Aug 2011
        • 719

        #4
        Re: Adjust Horizontal Scan Position on Glass or Doc Feeder for Kyocera 4551?

        Easier way if printing is fine:
        Run U411/ DP Auto Adj and follow the screen with printed adjustment chart
        1. Table
        2. DP Face Up

        Comment

        Working...