check inbuilt pf unit for stucking paper.(cass 3+4)
Take out both drawers, remove feed unit B1 and check.
we have had several similar cases...
KYO_OEM
KYO_OEM
Senior Tech
Last Activity: 1 week ago
Joined: 08-22-2011
Location:
-
i use chart 1 only, instead of chart 2-2 i use DP Auto Adj after standard drawer would set by U034.Leave a comment:
-
I do not think that your problem is coming from dirty ccd.
If system can`t read U410 chart, it also can`t read U411 chart (same as 52/53/54 series)...Leave a comment:
-
i found additional point: very low coverage for color printing
based on service status page and U920 you can see coverage from Ø 1% coverage for...Leave a comment:
-
it will run out again after next few faulty calibrations.
Compare your U000 report data with service manual description and decide by yourself...Leave a comment:
-
Check the self-connected plugs of the system and PF.
The most common problem was that something was bentLeave a comment:
-
FYI,
Common for all models
The FK unit would modified
we`ll see if it works better
...Leave a comment:
-
We have had stupid unknown errors coming from the fu***** punch pwbs.
Replace it and system will work without any problems in future.Leave a comment:
-
Good answers up to yet, but not real helpfull i think.
I am sorry for this answer.
It happens during copy and print, in case of printing issue...Leave a comment:
-
looks like memory overflow on harddisc/ ssd
run U021 and U024
Save data by U917 before, don`t write data back before testingLeave a comment:
-
This error can be a nightmare.
On Iris2020 (xx54 series) we have had developer motor for BK breaks down the power circuit!
Disconnect the...Leave a comment:
-
I agree with Lunatech regarding scanner drive.
We have had several problems with the scanner driving belt, get's hardened.
Mostly first page...Leave a comment:
-
Check all connectors on feed image pwb.
maybe connector problemLeave a comment:
No activity results to display
Leave a comment: