kyocera 2040 middle band issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • diwakar
    Technician
    • Aug 2019
    • 37
    #1

    kyocera 2040 middle band issue

    hi all

    there is a strange issue with our kyocera 2040

    after 10 prints, a black band of small horizontal lines is coming. please refer to the attached pic.

    any guidance will be much appreciated
    WhatsApp Image 2022-09-08 at 12.03.11.jpg
    Tags: attached, band, issue, kyocera, pic
    • rapo_tech
      Trusted Tech

      100+ Posts
      • Feb 2019
      • 114
      #2
      Re: kyocera 2040 middle band issue

      Probably fuser belt cracked... Fuser unit needs to be replaced.

      If itś jamming also, its most definatly bad fuser.

        Comment

        • ntbann
          Senior Tech

          500+ Posts
          • Jan 2012
          • 623
          #3
          Re: kyocera 2040 middle band issue

          That to me looks like drum charge issue.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22932
              #4
              Re: kyocera 2040 middle band issue

              It would probably help to know which direction the paper was feeding. Horizontal & vertical designations are meaningless ... as are portrait and landscape. Both describe the orientation of the image on the paper, not the orientation of the paper in the machine.

              Try "feed" & "crossfeed" for clarity. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • trunghuynh20202020
                  Technician_kyo
                  • Oct 2021
                  • 22
                  #5
                  Re: kyocera 2040 middle band issue

                  hello , our region is also experiencing this strange thing , all happens with model ecosys m2040dn , P2040dn , P2235dn , the more prints and prints, the more cyclical black streaks appear, both side 1 and side 2 , like the mc high voltage drop during machine operation , anyone has a useful solution , thank you very much
                  Attached Files

                    Comment

                    • copykat93
                      Trusted Tech

                      Site Contributor
                      250+ Posts
                      • Oct 2021
                      • 269
                      #6
                      Re: kyocera 2040 middle band issue

                      This machine runs 8 1/2" wide only

                      Looks to me like a drum issue, might want to call a tech to assist you.

                        Comment

                        • trunghuynh20202020
                          Technician_kyo
                          • Oct 2021
                          • 22
                          #7
                          Re: kyocera 2040 middle band issue

                          i think i'm getting high voltage error, the more phony and printing more black prints, counter 22k , i don't know if there is any service message board about this, any comments i'm very grateful

                            Comment

                            Previous template Next
                            Working...