Critical Firmware Update - MZ3200i-MZ4000i and PA4500x-6000x w/ IB37 or IB38 (US-FCC)

[PrintWhisperer]

If you (in the US or it's territories) have any of these machines, either in inventory or the field, Kyocera is directing you to immediately update the firmware for a defect in the selectable WiFi frequencies which are broadcast at device start-up.

That's really all I can say about that.

[KenB]

Re: Critical Firmware Update - MZ3200i-MZ4000i and PA4500x-6000x w/ IB37 or IB38 (US-

If you (in the US or it's territories) have any of these machines, either in inventory or the field, Kyocera is directing you to immediately update the firmware for a defect in the selectable WiFi frequencies which are broadcast at device start-up.

That's really all I can say about that.

Is there a "CVE" bulletin for this issue?

Thanks!

[PrintWhisperer]

Re: Critical Firmware Update - MZ3200i-MZ4000i and PA4500x-6000x w/ IB37 or IB38 (US-

Is there a "CVE" bulletin for this issue?

Thanks!

No CVE, this is not a vulnerability or exploit issue. More along the lines of compliance.

It is released as TB#2 for the stated models.