Errore f25c su kyocera m2135

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • CIRO
    Technician
    • Apr 2020
    • 33
    #1

    Errore f25c su kyocera m2135

    Good evening,
    For this code I first reset everything with (021) after which I put the latest fimware, the result when the multifunction is not on the network does not show the code described above, while as soon as I put the network cable a few minutes the code f25c appears .
    Kindly can someone give me some suggestion.thanks
    Tags: code, f25c, network, put, show
    • kuby
      Senior Tech

      1,000+ Posts
      • Oct 2007
      • 1388
      #2
      Re: Errore f25c su kyocera m2135

      Could be that someone sent a document in a format it does not recognize. Try deleting the print que and and the documents from the printer. F codes can be brain testing.

        Comment

        • CIRO
          Technician
          • Apr 2020
          • 33
          #3
          Re: Errore f25c su kyocera m2135

          Originally posted by kuby
          Could be that someone sent a document in a format it does not recognize. Try deleting the print que and and the documents from the printer. F codes can be brain testing.

          The code also appears when the printer is at rest, I check that there are no prints in the queue

            Comment

            • kuby
              Senior Tech

              1,000+ Posts
              • Oct 2007
              • 1388
              #4
              Re: Errore f25c su kyocera m2135

              Are you the only one that prints to this machine? If not you may have to find out who was trying to print and what they were trying to print and delete from their que. Worth a shot.

              Also:
              F25X Abnormality detecting in a network management
              department


              (1) Carry out U021 Main backup initialization and perform an operation
              check.

              (2) Exchange a Main/Engine PWB and perform an operation check.

              ALSO reseat any memory that might be installed.


              (3) Get USBLOG and packet capture and contact service headquarters.

              * It may occur according to a visitor's
              network environment.
              Ethernet Connector

              [Main unit<=>Outside network]
              Ethernet connector

              [Main unit<=>Outside network]
              Ethernet Connector

              ALSO reseat any memory that might be installed
              Last edited by kuby; 07-13-2023, 05:13 PM.

                Comment

                • CIRO
                  Technician
                  • Apr 2020
                  • 33
                  #5
                  Re: Errore f25c su kyocera m2135

                  Originally posted by kuby
                  are you the only one that prints to this machine? If not you may have to find out who was trying to print and what they were trying to print and delete from their que. Worth a shot.

                  yes of course it's the only one that prints

                    Comment

                    • BillyCarpenter
                      Field Supervisor

                      Site Contributor
                      VIP Subscriber
                      10,000+ Posts
                      • Aug 2020
                      • 16308
                      #6
                      Re: Errore f25c su kyocera m2135

                      On other models you go into the Web Interface and go to Security Setting and Error Setting and turn on Auto Error Clear. (may need to input the code, have not viewed this model yet).
                      Adversity temporarily visits a strong man but stays with the weak for a lifetime.

                        Comment

                        • CIRO
                          Technician
                          • Apr 2020
                          • 33
                          #7
                          Re: Errore f25c su kyocera m2135

                          Originally posted by BillyCarpenter
                          On other models you go into the Web Interface and go to Security Setting and Error Setting and turn on Auto Error Clear. (may need to input the code, have not viewed this model yet).

                          THANK YOU, I'LL TRY

                            Comment

                            Previous template Next
                            Working...