TA-5003i optional job separator options

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • copiertec
    Service Manager

    Site Contributor
    1,000+ Posts
    • Jan 2016
    • 2172

    TA-5003i optional job separator options

    Is there an external job separator for the TA-5003i series? I am familiar with the JS-7100 internal tray but was wondering if there was a external right side like the Alphard II series (JS-731).
  • ihatefinishers13
    Senior MFP Technician

    250+ Posts
    • Feb 2020
    • 395

    #2
    Re: TA-5003i optional job separator options

    Nope. I loved that Sharp has that option, but didn't like that the newer Kyocera's don't have that. Would be quite a nightmare, as the right side door would need to be completely modified.

    Comment

    • copiertec
      Service Manager

      Site Contributor
      1,000+ Posts
      • Jan 2016
      • 2172

      #3
      Re: TA-5003i optional job separator options

      Originally posted by ihatefinishers13
      Nope. I loved that Sharp has that option, but didn't like that the newer Kyocera's don't have that. Would be quite a nightmare, as the right side door would need to be completely modified.
      We are actually replacing a fleet of MX-M503's with right side trays for faxes.

      Comment

      • ihatefinishers13
        Senior MFP Technician

        250+ Posts
        • Feb 2020
        • 395

        #4
        Re: TA-5003i optional job separator options

        Originally posted by copiertec
        We are actually replacing a fleet of MX-M503's with right side trays for faxes.
        Just NOW you're replacing 503's? WOW, impressive as they're 4 generations behind... Those machines were work horses, just had to keep up with maintenance. We had a customer that had 50 machines, and most of them were over 2mil, if not 3 before their 5 year contract was up.

        Comment

        • copiertec
          Service Manager

          Site Contributor
          1,000+ Posts
          • Jan 2016
          • 2172

          #5
          Re: TA-5003i optional job separator options

          Originally posted by ihatefinishers13
          Just NOW you're replacing 503's? WOW, impressive as they're 4 generations behind... Those machines were work horses, just had to keep up with maintenance. We had a customer that had 50 machines, and most of them were over 2mil, if not 3 before their 5 year contract was up.
          I know, good copiers that ran well, some with 1.5+ mil on them. We also replaced a MX-M565N as well with 1mil. I know these Kyocera's run good too and it's not unheard of to get 1 mil+ out of them.

          Comment

          Working...