Can the lamps from a Kyocera-Mita KM2530 be interchanged with the lamps from a KM4035 and vice versa? Any help appreciated, thank you.
-
-
The part numbers are different, for sure.
This isn't the old days when the warmup time was 5 1/2 minutes, and it didn't matter if the lamp was a little hotter or cooler.
Based on what I'm looking at, No, don't interchange them. Use these part numbers:
2FG20130 Sub Heater
2FG20320 Main HeaterIf you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Now in case of you re talking about the scanner lamp ... they are the same
Comment
Comment