6030/8030 fusing issue

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • obiakpere
    Junior Member
    • Sep 2024
    • 1
    #16
    Dear All,
    I know this topic is very old but I find it handy because of the issue with my copier. In my own case, my staff was using it when paper jammed, the paper was removed but the printer started showing "machine failure" without any error code attached. Hence, I opened the back and discovered that fan above the fuser drive gear is broken, I then replaced it from my other 6030 from the scrap room but neither the fan now the fuser drive gear is spinning.
    Please I need help fixing this issue asap.
    Thanks.

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 23007
        #17
        You'll be able to view the current error message on the machines webpage or in service mode U904. You'll need to know the code first. =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

          Comment

          • Rpizzle
            Technician
            • Mar 2014
            • 47
            #18
            I believe I have some of these gears still.

              Comment

              Previous 1 2 template Next
              Working...