Hello ! i have this error code c1950 after replaced tranfers belt for about three week , i try to put lubricate oil in bearing and shaft. I needed some idea from u guys THANKS 
-
-
The manual suggests:
1) Reseat YC28 @ engine PWB, 2) Defective transfer belt speed detection PWB. Repl transfer belt unit.
If neither of those help, next I'd pin out the harness to YC28, then replace the engine PWB.If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Comment