Kyocera KM-3035

[Owaisebutt]

Hi Friends,

I have KM-3035 i want to change paper size of Drawer but dont know the managment code.Anybody have Idea how to know that????????

Thanks in Advance

[aodtech]

When you change the paper size in the cassette, it registers automatically.

[Owaisebutt]

Hello,
Actually my copier cuts print when i make copies or have list prints.From Bypass it never gives me full print of list or copy exaclty like i make from cassette.I thought there might be selection of paper size in bypass need to be adjusted.
Whats the management default code by the way or how can i check it??????
Any suggestions ??????

[stevee104]

I think the code for this model is 3000.

[welshman]

codes are

2000
3000
4000
5000

or Admin

or Admin01

or Admin1

web browser is admin1 all lower case



Thats the lot that Kyocera seem to use same for the password as well

[delhi_ngg_rhc]

admin code is 3000

[Scott]

3035 issues

I had a machine doing the same thing yesterday 1st time I have ever seen it. 906'ed it and problem went away

[delhi_ngg_rhc]

dear
906 is partial and opnational unit resetting code.
Good try. best luck

[Scorotron Wizard]

If 3000 won't work try 6482 (MITA)

[mmechura]

paper sizes

Sometimes the back of the paper drawer plugs get clogged with paper in this event the use will set the cassette size to the paper that they are running in that drawer. To change this to auto or another paper size you must go into machine defaults in the user settings. This is located using the asterisk button that is recessed above and to the right or left of the touch screen. Once you press that button the touch screen will change and select "machine defaults". The code is 6482 and you should be able to set the drawer sizes and paper types there. For the bypass, instead of Machine defaults select MPT tray and should the Auto selection be turned off that is where you can change it to a paper size/type and or change it back to Auto.

The remedy for the drawer issue is the small plug in the back of the drawer and on the machine frame, it is not uncommon for these to get filled with paper, most time you can remove the paper with some patients and a razor knife, it's easier though to just replace the male and female plugs.

Good luck