Good morning
Customer is trying to print an image on labels. The image is too low on the label. I have adjusted mm34 on both mpt(L) and...
17 results in 0.0118 seconds.
-
3552ci mpt alignment
-
TA6551Ci with J 0509
Hi all, just want to see if anyone has come across this jam code 0509 from the mpt, basically what happens is the mpt lifts as if its about to feed paper... -
Xerox Paser 7750
Having a jamming issue with the MPT tray , the cassette works fine with all sizes of paper . When paper is fed from the MPT tray , sometimes it will... -
LEXmark T644 MPT probblem
the client wants to print envelopes it pulls paper from drawer 1.
I left open drawer 1 and 2 and put plain paper in the mpt and printed a utility... -
kyocera 3040
Hello Friends, when I use DUPLEX MODE 2 sided copy the image of the first side and 2 side SHIFT UPWARDS about 1 inch, while using normal copy mode 1... -
Xerox workcentre 7132
AFTER ONE OR TWO COPIES MY XEROX WC 7132 KEEPS SAYING THAT THERE IS A JAM AT LEFT SIDE TRAY "A" (where it opens up to the Fuser) and SIDE TRAY... -
Xerox Phaser 7400 parts required but no numbers listed!
Hi all
I require part number 76 (circled in red) from PL10.1 in a Xerox 7400.
I have attached the image of the parts diagram... -
TA-250ci Color shift problem
Hello folks,
This machine has a color reg. problem, it appears. The problem only show up if the "media type" is set to anything heaver... -
HP LJ 4350 Constant PJ 13.10.00
Can anyone please help..
I am a Canon tech, and during an install that a customer they was going to scrap a HP LJ 4350dtnsl
So i saved it... -
Phaser 7400dn printing slow
Hi guys , We have a phaser 7400dn that prints extremely slow when printing from tray 2 .The paper comes out very slow we have checked all motors .When... -
kyocera 3035 lead edge problem
only one the fourth copies lead edge move about 1.5 inches and then goes back correct and back bad agin. Can anyone help -
Kyocera KM-3035
Hi Friends,
I have KM-3035 i want to change paper size of Drawer but dont know the managment code.Anybody have Idea how to know that????????... -
F-35-10
Hello I got a Konica 7135 for free and it was working, then drawer 1 stopped working, then 2, so I was using MPT then it came up, Please Call Service... -
Anchor/Wallace Church Bulletins
Anybody else having any trouble ? I've got a church with a 3060 with about 40K on it. They were having trouble running bulletins on this preprinted stock.... -
Minolta pagepro 9100
This is one of my customers printer which i wouldn't normally work on but i did. Problem is not all print jobs but most when you hit print it gives message...
