6030 duplex

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22999
    #16
    Re: 6030 duplex

    Originally posted by blackcat4866
    You'll want to replace the duplex switchback roller (302FB19401). When it wears the roller wears conical.

    When it's new it's 66mm circumference. As it wears, the rear wears faster than the front. When the difference becomes 1.3mm (65.3mm at front, 64mm at rear) the paper skews so badly that when inverting for exit or duplex, the rear edge flips, causing J60, J62, J63 jams. When stapling, the flipped corner prevents the paper from setting in the stapling tray properly. =^..^=
    I'm suggesting that you measure, like in the previous post. A difference of 1.3mm in circumference, or 0.41380286mm in diameter will cause these jams. I don't really think that you can visually measure to that accuracy, especially with only a partial view of the roller.

    Measure the circumference with paper, not diameter.
    My recommendation is to measure, don't guess. =^..^=
    Last edited by blackcat4866; 03-24-2013, 11:56 PM.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

      Comment

      • farhanali79
        #17
        Re: 6030 duplex

        Originally posted by blackcat4866
        I'm suggesting that you measure, like in the previous post. A difference of 1.3mm in circumference, or 0.41380286mm in diameter will cause these jams. I don't really think that you can visually measure to that accuracy, especially with only a partial view of the roller.

        Measure the circumference with paper, not diameter.
        My recommendation is to measure, don't guess. =^..^=

        OH YES it's the switchback roller. Thanks a lot blackcat4866

        Since we have very few machines here in Pakistan, I couldn't find a new replacement. For the time being, I wrapped a thin tape around the white roller nicely and the jam is gone. will order a new roller online.

        Thanks once again

          Comment

          • blackcat4866
            Master Of The Obvious

            Site Contributor
            10,000+ Posts
            • Jul 2007
            • 22999
            #18
            Re: 6030 duplex

            Congratulations. =^..^=
            If you'd like a serious answer to your request:
            1) demonstrate that you've read the manual
            2) demonstrate that you made some attempt to fix it.
            3) if you're going to ask about jams include the jam code.
            4) if you're going to ask about an error code include the error code.
            5) You are the person onsite. Only you can make observations.

            blackcat: Master Of The Obvious =^..^=

              Comment

              • sham.panhale
                Technician

                50+ Posts
                • Sep 2012
                • 54
                #19
                Re: 6030 duplex

                I am also looking for -

                302FB19401 Roller Switchback - 12 Nos
                KYOCERA 2FB20500 HEATING LAMP - 6 Nos .
                Any Good link for price ???


                Originally posted by farhanali79
                OH YES it's the switchback roller. Thanks a lot blackcat4866

                Since we have very few machines here in Pakistan, I couldn't find a new replacement. For the time being, I wrapped a thin tape around the white roller nicely and the jam is gone. will order a new roller online.

                Thanks once again

                  Comment

                  Previous 1 2 template Next
                  Working...