urgent 3

[vikingmita]

it's rather late, but anyway: parts manual say 250v/170c for thermostat


nitpicking: blackcat, remember that not everyone live in the western world.

[zaza]

[Eric1968]

He doesn't buy manuals, he wants them for free.

[blackcat4866]

well dear Blackcat ..l have manuals for this kyocera ...but unfortunality you don't undrestand my question ..l want the value for thermal switch because we have not this thermal switch in the city ..well l search the equivalente for this thermal switch for other brand ..like mita ...thx

I thought that you had manuals. I recommend that you purchase a manual.

[zaza]

hello friend blackcat4866 but l have not the manual parts for this kyocera ..only l have sm for kyocera fs1016 ..well l serach the value of heat for thermal cut out ....please healpe me ..and this is my mail .. mecanographe@gmail.com

[blackcat4866]

You should look on page 19 of your parts manual. It shows that the FK-110(E) fuser in your FS-1116mfp is very similar to the FK-110(U) fuser in your FS-1016mfp. As a matter of fact both use thermostat part #: 302FV27060.

This is why I needed to know the model number. =^..^=

[Eric1968]

I think he wants to use an equivalent thermofuse to use in his machine. I think he wants to know at which temperature the original thermoswitch cuts power to the heater lamp, so that he can try to find a replacement for the original one.

[DWise]

you will need to contact a Kyocera reseller, I can not give you a price on that.

[zaza]

hello friend Dwise please l search the value of the heat for this thermal cut out of kyocera fs1016 ? please healpe me ...

[DWise]

Zaza... check in a manual for the part # and then contact a Kyocera reseller for price.

[zaza]

hello ..l'm come back ...my requests is very clear ..maybe l not more explaine but ..l remember my question ...l have kyocera 1116 ..her thermal switch is broken ..in my city l search more then more but l not found it ..so l search the equivalente for other type of kyocera or other brand of copiers ...thx .

[DWise]

I didn't think it was, but then again, I might not be understanding the question...

[blackcat4866]

Now was that a difficult question?

[DWise]

What model are you working on??

[zaza]

well dear Blackcat ..l have manuals for this kyocera ...but unfortunality you don't undrestand my question ..l want the value for thermal switch because we have not this thermal switch in the city ..well l search the equivalente for this thermal switch for other brand ..like mita ...thx