TA250/.../500ci - color and BW printing mode

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Vandys
    • Nov 2024

    TA250/.../500ci - color and BW printing mode

    Please use this information how you want yourself. Please give me an information if you think that I am wrong.
    This knowledge can be usefull for machines under SLA and rented per click.

    I have discovered the non standard behavior of machines when the machine prints the job where are color and BW pages. I suppose that the color pages are printed in color mode and BW in BW mode.

    But this is not true always.

    There is U486 which control the color modes during copying but during printing as well.
    The default value is MODE2.

    In MODE2 the machine prints all pages in color mode. Only the counters counts right.
    In MODE1 the machine run right. The BW pages are printed by black toner only.

    NOTE:
    When you use GDI mode in emulation all pages are printed as color pages.
  • Frits
    Technician
    • Jun 2009
    • 62

    #2
    U486

    In mode 2 it wil switch the process after 10 page's to monochrome printing
    See de SB

    This mode is suitable for the user
    with high monochrome printing rate
    and high mixed printing rate in color
    and monochrome when
    continuously printing. Even if a
    monochrome printing request is
    received during color printing, color
    printing is continued up to 10
    sheets. Afterwards, color operation
    is switched to monochrome
    operation (stop of color process).
    Attached Files

    Comment

    Working...