Can a fax be forwared on a KM3035

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • alpha-omega tech
    Technician

    50+ Posts
    • Jan 2010
    • 80

    #1

    Can a fax be forwared on a KM3035

    Can a fax be forwared on a KM3035 to email and how if it can. I checked the command center and did not see anything in that. I know newer models it is possible through the command center.
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22979

    #2
    If you set up the ScanFile Utility, you should be able to forward faxes to email. That's how it's done on the VoyagerE series machines. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • vikingmita
      Trusted Tech

      100+ Posts
      • Nov 2008
      • 163

      #3
      it's a couple of years since last time i did that, and it's (was) a pain in the ass compared to the newer machienes. don't remember exactly, but scanfile utility has to be set up correctly for fax (fax handler, generates two folders, rx and tx, recieve and transmit) , and the faxcard (under standard fax) has to be set to relay, pointing to the correct folder, things/folders have to be right clicked and left clicked etc, etc, etc. after all that has been sorted out, scanfile utility itself has to be set up to forward to email. not remotely close to the simplicity on current models. if you never ever have been setting up scanfile utility, you'll need some kind of manual. good thing is that when it works, it works well.

      i do realize this doesent help you much other than: sell them a new machine :P

      Comment

      Working...