KM1650 "please wait"

[lanierboy]

Hi Everyone.

I have a KM1650 that displays "please wait" on occasion and you have to power off the system and back on again then it will be ok for a couple of days then do it again.
so far we have changed the fuser,main board,engine board,network card and done the firmware.

help please!!!!

thanx

[Dave10]

Is this when printing? Sometimes a file problem can lock up the machine like this. If this is the case, update drivers and try changing the printer emulation. This usually helps.

[Jules Winfield]

I've also reinitialized the memory on machines in this series to fix this particular problem...