I am looking for Tandem Printing Software that I can use across manufacturers. Has anyone ever heard of or seen such a thing?
-
-
We have many Sharp machines connected in tandem (eg 2 x MXM1100 together, 2 x MXM950 together at multiple locations). They are setup with the SC port, whereas regular printing is using an SC2 port. -
I did a little searching. Tandem copying is available on a few of the early digitals, but I do not see any accessories or software to tandem print. I'm sure that there is some sort of aftermarket software out there ...
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
But I'm trying, Ringo. I'm trying real hard... to be the Shepherd.
Comment
Comment