Machine boots then goes into this error, I have not seen this code before so....
cfb2b
any ideas?
cfb2b
any ideas?
-
-
it's a panel error use the boot switch under the panel reboot, shutdown, firmware the machine agian -
I did the boot switch twice and reloaded firmware twice and it still errors out with cfb2b and cfb2c codes, can ot get into simulation either.Comment
-
Component: Panel. Category: KI-Panel. Netfront error (SLIM_BROWSER_ERROR_KMC_FILEDOWNLOAD).
The next step is to replace the op panel, then load firmware again. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
ouch Blackcat, that one is going to hurt some.
not making any money on this contract...Comment
-
Replace the whole panel and its fixed @$1,000.00
Now I need to drink and forget about it.Comment
Comment