FSC5300

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • spacedust
    spamanamamammmmm
    • Jan 2010
    • 47
    #1

    FSC5300

    hello all
    can anyone help, i need a part number for the fsc5300 laser unit.
    page 36 in parts man, item 26 or 27......
    cant figure which one is right ?
    in the uk.

    regards
    Tags: 300, fsc, fsc5300, help, laser, number, part, part number, parts, print speed, unit
    • Tebow83
      Technician

      50+ Posts
      • May 2009
      • 92
      #2
      it looks like there is two laser in that machine from the parts manual but i've never replaced one. Did you strip it down and look?

        Comment

        • spacedust
          spamanamamammmmm
          • Jan 2010
          • 47
          #3
          i didnt do the call, but i was asked to get the number.........but yes it does look like two or maybe two types for diff speeds...

            Comment

            • fpi_2000
              Technician
              • Sep 2010
              • 12
              #4
              The laser closest to front of machine #27 in parts diagram is PN: 302HN93100, the rear laser, #26 in parts diagram is PN: 302HN93090

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22999
                  #5
                  There are two laser diodes writing one drum each, and one mirror motor, in each laser assembly. Each laser assembly writes two drums, thusly two laser assemblies: LK-560A and LK-560B.

                  You'll want
                  (1) 302HN93090 LK-560A
                  (1) 302HN93100 LK-560B
                  unless you can narrow down which one is the problem.

                  The numbers you see in the parts manual are based on print speed (5100/5200/5300), and the same laser assemblies are used across the board (110v/120v/220v/240v). I'm assuming that UK is 220v (it doesn't matter anyway)?
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • spacedust
                      spamanamamammmmm
                      • Jan 2010
                      • 47
                      #6
                      thanks, turns out tech bul 2hl-0010(8809) gives me the info i need.......

                      again thanks to all who replied

                        Comment

                        Previous template Next
                        Working...