c620 on a Copystar cs-1510

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Supertech
    Technician

    Site Contributor
    50+ Posts
    • Feb 2005
    • 84
    #1

    c620 on a Copystar cs-1510

    I did some work and left the fuser lamp unplugged when turned this machine back on and got a c620 code. now it wont reset. tried the door, the side door and everything else. What am I missing or did I cook the main board.:whistle:
    They call me Supertech for a reason
    Tags: 151, 1510, 510, back, c620, code, codes, copiers, copystar, cs1510, door, every, exposure, fuser, kyocera, kyocera mita, lamp, left, main, maintenance mode, mita, off, release, reset, side, simulation, work
    • dbrownlee
      Trusted Tech

      100+ Posts
      • Sep 2005
      • 197
      #2
      Re:c620 on a Copystar cs-1510

      You need to run sim U163 to reset fixing heater problems. Press and hold stop, start, and left exposure key in that order. Release and press stop again. Use zoom keys to enter 163, press start. Exit the mode by entering 001 and start, or power off/on.
      GO TIGERS!!

        Comment

        • Supertech
          Technician

          Site Contributor
          50+ Posts
          • Feb 2005
          • 84
          #3
          Re:c620 on a Copystar cs-1510

          Thanks, I saw the maintenance mode in the manual but never made the connection to the error code in my brain.
          They call me Supertech for a reason

            Comment

            • 10871087
              Service Manager

              1,000+ Posts
              • Jan 2005
              • 1143
              #4
              Re:c620 on a Copystar cs-1510

              All the new Kyocera Mita copiers use a simulation to reset fuser codes.

                Comment

                Previous template Next
                Working...