hi guys how to go service mod in kyocera mita km3035 and how to reset drum counter and developper count pls help anybody
-
-
Ec ec, enter 10871087, i don't try reset drum and developing, you can check U020/U021, good luck -
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest collection of manuals | Instant Downloads - Just Manuals | The Internet's largest collection of manuals | Instant Downloads
Paul@justmanuals.comComment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
KM5050...... You need to go to the STATUS page first before going to Service Mode (10871087).
DO NOT, I repeat, DO NOT do Sim 20 or Sim 21, this will Erase ALL your DATA. This is a Mono-Component Machine, There is no Developer, so the Count is for Developer Unit, Once the Drum adn Developer Unit have been replaced, the count will be resetComment
-
Running U130 will reset the developer count for you. If you replace the drum after 400k, the machine is smart enough to reset the drum counter. If it's less than 400k, it won't reset the drum counter, but I don't think it has any side effects.Comment
Comment