Custom Box - Taskalfa 250ci

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Eric1968
    Service Manager

    1,000+ Posts
    • Jan 2009
    • 2458
    #1

    Custom Box - Taskalfa 250ci

    A customer wants to send print jobs to the machine to a custom box using e-MPS. He defined a few custom boxes on the machine. Every box has a password. He has programmed the password for each box in the printer driver (in printing preferences).

    Everything works OK, but after he sends the print job he must fill in the password for the box again, allthough he has programmed it the printer driver.

    Is it possible to configure this function without providing the password twice?

    Thanks in advance.
    Tags: box, customer, driver, function, password, print, printer, printing, send
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22929
      #2
      That's just the way it works. When you re-write the firmware, let me know. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Eric1968
          Service Manager

          1,000+ Posts
          • Jan 2009
          • 2458
          #3
          I will, thanks for the reply!

            Comment

            Previous template Next
            Working...