"spots" on prints KM-3050

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • LNorris
    Senior Tech

    500+ Posts
    • Sep 2008
    • 645
    #1

    "spots" on prints KM-3050

    it wasnt happening when i got there (go figure). i checked drum, charge grid, dv unit for anything unusual and couldnt find anything.

    just checking to see if anyone else has seen it? solution?foreman.jpg
    Tags: 3050, 865, charge, config, drum, prints, solution, spots, unit
    • aragul
      Trusted Tech

      100+ Posts
      • Dec 2007
      • 128
      #2
      Clearly the copier believes the students should be connecting the dots instead of writing sentences.

      That looks familiar, but I can't remember where I saw it. I'd start with electrical and high voltage. Test wall voltage, try a different main charge (Falcon 1-2 if you don't have a spare 3-4), etc.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22930
          #3
          It still looks like primary charge arcing to me. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            Previous template Next
            Working...