Kyocera 420i KX print message keeps coming up

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • LLL
    • May 2025

    #1

    Kyocera 420i KX print message keeps coming up

    I have Kyocera 420i KX network connected.
    Problem is that after printing it is showing print message, but once it disapeared it's coming up again and again.
    How can I get rid of it, and what is wrong?

    Thanks
  • LNorris
    Senior Tech

    500+ Posts
    • Sep 2008
    • 645

    #2
    whats the message? do you have correct print driver installed?

    Comment

    • LLL

      #3
      Small message with printing status, in bottom left corner
      Everything was working fine, so drivers were installed correctly.

      It's gone now(I tried 10 mins ago), but I would like to know what was the reason.

      Comment

      • LNorris
        Senior Tech

        500+ Posts
        • Sep 2008
        • 645

        #4
        Could have been trash in the network.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22932

          #5
          If you knew the actual message, maybe we could help.
          I suggest that my customers take a screen shot, if they are unable to write, or can't remember. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

          Comment

          Working...