TA 300i could send faxes but not receive U19000 error

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Venom
    Technical/IT Support

    500+ Posts
    • Nov 2009
    • 765

    [Error Code] TA 300i could send faxes but not receive U19000 error

    Just a FYI: Upgraded firmware from ver 5 to ver 7 and it fixed
    IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22743

    #2
    Don't you remember the CS-5050 firmware versions 2.41, 2.43, & 2.44? Locks up on fax Rx. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • Venom
      Technical/IT Support

      500+ Posts
      • Nov 2009
      • 765

      #3
      Its funny, machine works fine for 5 months, then needs firmware to fix.
      IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

      Comment

      Working...