Kyocera KM2050 - Scanner

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • infin8
    • Jun 2025
    #1

    Kyocera KM2050 - Scanner

    Hi members I have a KM-2050 which has a scanner attached.
    It is working ok, however we need to add another destination folder, Updated the File Utility but the web interface of the scanner wants a password.
    I have tried admin and pass, admin and admin, admin and 2050 and so on but no luck.

    What is a default logon for the scanner, or is their a way to default.

    I rang Kyocera and the tech asked me to turn on the SMTP authentication on the printer command centre but that done nothing.

    There also fresh out of ideas.

    Is their any utilities or default procedures for these things?

    thank in advance
    Tags: centre, clueless, file, folder, km-2050, kyocera, magically, password, printer, scan, scanner, tech, web
    • Metalvoc
      Trusted Tech

      100+ Posts
      • Sep 2008
      • 155
      #2
      I don't believe there is a default password for the web interface on those. Someone must have set one. Is this a refurb machine? Hopefully someone at your company set the password. If not, U504 will set all your scanner settings back to default. You'll want to make sure you have all your current settings printed out, though!
      I must have a prodigious quantity of mind; it takes me as much as a week sometimes to make it up - Mark Twain

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22997
          #3
          Originally posted by Metalvoc
          I don't believe there is a default password for the web interface on those. Someone must have set one. Is this a refurb machine? Hopefully someone at your company set the password. If not, U504 will set all your scanner settings back to default. You'll want to make sure you have all your current settings printed out, though!
          Like he said.
          I strongly discourage the local IT rep from changing default passwords. Inevitably I get one of those calls:

          " ... and I can't remember what I set the password to. Is there a default password?"
          "Yep. And you changed it." =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • infin8
              #4
              U504 Procedure

              Hi Gents, Care to elaborate on the U504 Procedure?

              I rang tech support again today and they said its coming from the network.

              The guy who setup the scanner originally was clueless so I dare say he is the responsible party.

              I opened up the back and there are no reset buttons on the card but there is a jumper.

                Comment

                • Metalvoc
                  Trusted Tech

                  100+ Posts
                  • Sep 2008
                  • 155
                  #5
                  There isn't much to elaborate on. No need to use any physical jumpers. just enter maintenance mode, go to sim 504, press start, select "execute", and press start again. Magically, all of your hard work setting up the scanner disappears! So, if possible, make sure that you write down any network settings that you still have access to before you do this. It will save you some time. Unfortunately, you probably won't be able to access the destination information for the different scan locations.
                  I must have a prodigious quantity of mind; it takes me as much as a week sometimes to make it up - Mark Twain

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22997
                      #6
                      Yep. Count on losing the SMTP, IP address, Scan sender information, & Scan destinations.
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • toni
                          Junior Member
                          • Mar 2009
                          • 8
                          #7
                          Hola has probado con 6428

                            Comment

                            • infin8
                              #8
                              Hi members thanks for the Posts I shall give it ago in the morning. How does one enter maintenance mode to perform SIM 504?

                                Comment

                                • infin8
                                  #9
                                  Re: Kyocera KM2050 - Scanner

                                  Hi Members, Still have no access to Defaulting the Scanner Card. Can anyone share an installation manual or instructions on how to default the Card?

                                    Comment

                                    • blackcat4866
                                      Master Of The Obvious

                                      Site Contributor
                                      10,000+ Posts
                                      • Jul 2007
                                      • 22997
                                      #10
                                      Re: Kyocera KM2050 - Scanner

                                      Have you purchased a service manual? I'm sure Paul has one at www.justmanuals.com
                                      =^..^=
                                      If you'd like a serious answer to your request:
                                      1) demonstrate that you've read the manual
                                      2) demonstrate that you made some attempt to fix it.
                                      3) if you're going to ask about jams include the jam code.
                                      4) if you're going to ask about an error code include the error code.
                                      5) You are the person onsite. Only you can make observations.

                                      blackcat: Master Of The Obvious =^..^=

                                        Comment

                                        • infin8
                                          #11
                                          Re: Kyocera KM2050 - Scanner

                                          No I Didn't, I thought perhaps a Kind member would provide some destruction's.
                                          I know how to get into setup but cant find the U504, so is there a procedure to get into an advanced maintenance mode.
                                          I found the PDF for the Copier/Scanner but no where does it show how to get into this mode.

                                          If it is that secret that it cannot be posted on a forum would a member with experience kindly PM me the details on how to get it defaulted. I would be eternally grateful.

                                            Comment

                                            Previous template Next
                                            Working...