Intermittant imaging problems Kyocera FS-1028MFP (Olivetti d-Copia 283MF)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dufeuit
    • May 2025

    #1

    [Misc] Intermittant imaging problems Kyocera FS-1028MFP (Olivetti d-Copia 283MF)

    Hi all,

    I am relatively new to print and have a customer who has been experiencing intermittant imaging problemsphoto.JPG such as the attached image and also feignt copies\prints. The copier has recently had a maintenance kit installed which included new Dev unit and Drum unit, it has also had a fuser unit in the past 6 months as a user managed to damage the old one trying to retreive a jam. Could this be the transfer roller?

    Thanks
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: Intermittant imaging problems Kyocera FS-1028MFP (Olivetti d-Copia 283MF)

    This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

    Paul@justmanuals.com

    Comment

    • Venom
      Technical/IT Support

      500+ Posts
      • Nov 2009
      • 765

      #3
      Re: Intermittant imaging problems Kyocera FS-1028MFP (Olivetti d-Copia 283MF)

      I would suspect that the drum unit is making poor contact
      IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

      Comment

      Working...