Kyocera KM-3035

[Guest]

Copier will not save settings but automatically copies and prints to 51/2 x 81/2. Also fax section will say it's going to fax 81/2x11 then as its sending swiches to 51/2x81/2. How do I fix this.

Another note, I do not have the password.

Help please!

[marc]

Re: Kyocera KM-3035

Those setting you have to changed in the printer driver go to printer preferences-basic-and select print size letter 100% about the password I don't khow which one the one for machine default is 3000

[clearview]

Re: Kyocera KM-3035

The preferences are set to 100% any other ideas?

[marc]

Re: Kyocera KM-3035

go to default setting-machine default-select paper size-change to auto detection unit inch

[blackcat4866]

Re: Kyocera KM-3035

Copier will not save settings but automatically copies and prints to 51/2 x 81/2. Also fax section will say it's going to fax 81/2x11 then as its sending swiches to 51/2x81/2. How do I fix this.

Another note, I do not have the password.

Help please!

Are you saying that the scanner always identifies the original as statement-R? =^..^=

[Metalvoc]

Re: Kyocera KM-3035

You've got an original size detection problem. you can try switching out the sensors in there. You might even be able to figure out exactly which one it is by using sim 99

[clearview]

Re: Kyocera KM-3035

_{is this on the printer itself now or a setting on the computer?
sorry - no experience, my boss is trying to avoid payine $200 for something simple :S}

[blackcat4866]

Re: Kyocera KM-3035

Are you saying that the scanner always identifies the original as statement-R? =^..^=

So answer my question, please. =^..^=

[JustManuals]

Re: Kyocera KM-3035

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[clearview]

Re: Kyocera KM-3035

Sorry, customers...
i have no idea what you are talking about...

[clearview]

Re: Kyocera KM-3035

any one else have some advice! ps- you are talking to someone who knows nothing about printers/copiers except to push start!

[habik]

Re: Kyocera KM-3035

Is your copier under fluorescent light OR any other rather bright light?

This is what usually messes up the OPTICAL sensors.

If the width is the issue than just dis-assemble the feed tray, and clean any dust/ rubbish that may affect conductivity on the copper brush. Don't worry about lube as there is plenty left, you can easily wipe it off.


Just lift it up to vertical position and from under neath you can see I think 4 screws that are holding the unit together..pretty easy job.

Let us know if this was the case.

Habik

[jummamaster]

Re: Kyocera KM-3035

any one else have some advice! ps- you are talking to someone who knows nothing about printers/copiers except to push start!

If you know nothing about technical details, call a technician. It would be the best solution in my opinion.

[blackcat4866]

Re: Kyocera KM-3035

Truly. Our goal here is to assist individuals to solve problems. Not to give away technical expertise, and teach unwilling individuals with no background or initiative to be technicians.

When I hear "Don't explain it to me, just tell me what to do.", that's when I'm finished. Call a tech. =^..^=

[kyocera10]

Re: Kyocera KM-3035

wrong casette detection, there must be something a piece of paper or anything in the sensor