Colour tables

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • panaboy
    #1

    Colour tables

    Hi there guys

    Just wanting to know that if by updating the colour tables on the taskalfa machines with bizhub tables , would that improve my colour print quality ?
    Also , how would one go about doing it ?

    thanks
    Tags: bizhub, color, colour, one, print, quality, taskalfa, updating
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22999
      #2
      Re: Colour tables

      I haven't done much experimentation with the Saturn series, but from my experiences with the VoyagerE series you can gain incremental improvements, but don't expect some sort of magical transformation from a business color MFP to a graphics color MFP.

      The Saturn will remain a business color MFP. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Metalvoc
          Trusted Tech

          100+ Posts
          • Sep 2008
          • 155
          #3
          Re: Colour tables

          It depends on what you're going for. I use the bizhub tables on most of my taskalfa's. The standard color tables are great, and very accurate, but most customers don't really care how accurate they are, no matter how many times you tell them. They just want that blue they put in their Word document to print out blue. So, if you've got customers using MS Office software, the bizhub tables are the way to go. If you have customers that work with graphics, and actually understand how colors are produced, the standard tables are best.

          The color tables load into the machines like firmware. It's just two files on a flash drive, turn the machine on, files load and you are all set. You will have to get the color table files from your tech rep. Depending on which machine you need them for, I might have something for you.
          I must have a prodigious quantity of mind; it takes me as much as a week sometimes to make it up - Mark Twain

            Comment

            • Kyoric
              Junior Member
              • Apr 2009
              • 5
              #4
              Re: Colour tables

              I would be interested. Send me a note. Kind of new at this.

                Comment

                • cmpelser
                  Trusted Tech
                  • Jan 2008
                  • 173
                  #5
                  Re: Colour tables

                  TaskAlfa 265ci color tables???
                  I need some help regarding color tables on the 265ci
                  ive never set this up.
                  Please help.

                    Comment

                    • Tonerkiller
                      Senior Tech

                      500+ Posts
                      • Oct 2012
                      • 668
                      #6
                      Re: Colour tables

                      I do not know if there are tables for that model. We do not sell it here. You will have to call Kyocera in your country.

                        Comment

                        • cmpelser
                          Trusted Tech
                          • Jan 2008
                          • 173
                          #7
                          Re: Colour tables

                          It's the same as the fs-c2626
                          and it takes the same firmware.
                          Are there color tables for the fs-c2626 then?

                            Comment

                            Previous template Next
                            Working...