Anyone for 15 minute epoxy and coat hanger?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22929
    #1

    Anyone for 15 minute epoxy and coat hanger?

    Its for J85 jams on a DF-710. According to the manual its called the feedshift guide 2.

    100_0279 cropped.jpg

    I knew just from the look of it that superglue wasn't going to hold that itsy bitsy little end, but glued it there just long enough to get some dimensions.

    100_0280 cropped.jpg100_0281 cropped.jpg

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=
    Tags: 184, 710, coat, config, df-710, dime, epoxy, guide, jams, long, manual, minute, superglue
    • 20gaugeO/U
      Senior Tech

      500+ Posts
      • Feb 2009
      • 553
      #2
      Re: Anyone for 15 minute epoxy and coat hanger?

      I'll probably last forever.....great now I need a coat hanger for my tool kit

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22929
          #3
          Re: Anyone for 15 minute epoxy and coat hanger?

          Between the coat hanger, and the paper clips ...
          =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • HenryT2
              Senior Tech

              500+ Posts
              • Apr 2010
              • 962
              #4
              Re: Anyone for 15 minute epoxy and coat hanger?

              COAT HANGER ? Well, ya use whatcha got, right ?
              P. S. What ever happened to Baling Wire ?
              "The Serenity Prayer" . . .
              God grant me the serenity to accept stupid people , the courage to not waste my time and energy on them , and the wisdom to know that I cannot fix STUPID .

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22929
                  #5
                  Re: Anyone for 15 minute epoxy and coat hanger?

                  Fence wire is even better yet, but too hard to cut, and I don't carry around the big fence pliers/cutters. =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    Previous template Next
                    Working...