Cs-1815 Error Code C3200

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • yakyitz
    Trusted Tech

    100+ Posts
    • Nov 2007
    • 244

    #1

    Cs-1815 Error Code C3200

    I have a cs-1815 with intermitant c3200 error code. the lamp will beon and I still get the code anyone know the most probable solution.
    the Knight book lists lamp, scan board, inverter board,shading plate position or connections
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22999

    #2
    So what will you do next?

    There are three simple criterion:
    A) The cheapest first,
    B) The most likely first,
    C) or my personal favorite, a combination of both.

    Cheapest First:
    1) clean & check white level reference/adj position
    2) check connections
    3) lamp and inverter (replace as a set)
    4) scan board
    5) CCD

    Most Likely First:
    1) lamp and inverter (replace as a set)
    2) clean & check white level reference/adj position
    3) check connections
    4) CCD
    5) scan board

    The Combination:
    I'd do 1), 2), & 3) right off. Then if it still had a problem, I'd look at the cost of 4) & 5).
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    Working...