TaskAlfa 500ci. error F040

[NeoMatrix]

Re: TaskAlfa 500ci. error F040

Re: Firmware.
Reformat a 1-2Gb USB stick to FAT16. Reinstall the Firmware one single update at a time on the USB/CF stick. Do your "Panel software" , then "Engine Software" etc., etc..... The reason being: you may have some sort of on board memory limitation due to an i/o error. Loading one firmware modual update at a time can help over come this.

Wait for each update to complete......... it may take some time to update. Try... to... be... patient....

[habik]

Re: TaskAlfa 500ci. error F040

did same procedure according to the Manual

right this is communication error
first we replaced engine pcb
then main pcb
then dimm and HDD

this error is showing after welcome Screen(when loading the HDD) exactly after 2 minutes and when uploading the firmware it gives error (hi voltage cpu error)this error is appearing in the middle. CF card also same(no change).not able to update.

Thanks and Regards

Take the HDD out reformat it and slap it back with NEW FW on USB stick OR CF in CF slot and try to reload the FW TO NEW HDD..

COMM ERROR between Operational panel and main PCB?

If changing the dimm on panel make sure you change panel pcb too .

[DWise]

Re: TaskAlfa 500ci. error F040

Are you getting the error after power-cycling printer with communication cable (network, parallel, usb) unplugged from machine? If the error is coming up and you have the communication cable plugged in, be sure and check your Print Queue and delete any jobs that may be stuck, then re-try it.

[rashid120]

Re: TaskAlfa 500ci. error F040

did same procedure according to the Manual

right this is communication error
first we replaced engine pcb
then main pcb
then dimm and HDD

this error is showing after welcome Screen(when loading the HDD) exactly after 2 minutes and when uploading the firmware it gives error (hi voltage cpu error)this error is appearing in the middle. CF card also same(no change).not able to update.

Thanks and Regards

[kkendric]

Re: TaskAlfa 500ci. error F040

CF040

CF040

Engine PWB communication error

Defective main PWB -> Replace the main PWB and check for correct operation.

Defective engine PWB -> Replace the engine PWB and check for correct Operation

[JustManuals]

Re: TaskAlfa 500ci. error F040

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[taskalfaman]

Re: TaskAlfa 500ci. error F040

hi,
does the error code appear as a CF code in the middle of the display.
or on the lower right side, because these are 2 complete different code.

BR

[ss12]

Can you not do a forced firmware upgrade using a cf card and the switch under the ops panel.I'm sure there is a procedure in the manual for this

[rashid120]

TaskAlfa 500ci error is F040.already replaced engine PCB,mian PCB,HDD and Dimm.not able to upgrade the firmware.

any idea?