I HAVE kyocera km-1635 have error A-0610, the machine on and oFF, but still the error come, i try read the Manual the Problem is The main PWB?,my concern what part of the main pwb that hit this kind of error, is any out there have a main pwb Electronic diagram for this? i mean detailed diagram and its function,tnx
-
ERROR HELP ME AND HELP YOU -
Re: KM-1635 ERROR A-0610
Don't forget the RAM DIMM memory. That's another possibility.
You may be a bit optomististic about your board repair skills. It's been more than 10 years since I could do board level repairs. The components are just too small, and boards are multi-layered making large portions of the board inaccessible. All you're going to do is waste a lot of time before eventually ruining the board you have, and purchasing a new one. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: KM-1635 ERROR A-0610
Try reloading firmware before troubleshooting the main board. It may save you some time...But I'm trying, Ringo. I'm trying real hard... to be the Shepherd.
Comment
Comment